Trusted HVAC Repair in the Pittsburgh Area

An air conditioner that won’t turn on with the thermostat set to Cool usually points to a power, control, or safety shutoff issue. The most common culprits are a tripped breaker or the thermostat not sending a cooling call due to settings or dead batteries. Safety devices can also stop ACs: a full condensate pan often trips a float switch and quietly locks out cooling. If the indoor blower runs but the outdoor unit is silent, think disconnect, capacitor, or contactor. We see this often in Lawrence‑area homes, and we offer 24‑hour repair when needed.

• Check thermostat mode, setpoint below room temp, and replace batteries.
• Reset a tripped AC breaker; confirm the furnace/air‑handler switch is on and the blower door is secured.
• Verify the outdoor disconnect is in; empty a full drain pan or clear a stuck float switch/condensate pump.
• Replace a clogged air filter; if lines are iced, power off and let thaw before retrying.

If breakers re‑trip, you smell burning, or wiring looks damaged, turn the system off and call a professional.

Updated: 2026-07-04

Need help in Lawrence, PA? Call (412) 254 4979 or book online.

HVAC repairs cost more because they include skilled NATE‑certified diagnostics, 24/7 emergency readiness, stocked parts for fast fixes, required permits for major heating repairs, and post‑repair testing. Complex systems (furnaces, boilers, heat pumps, ductless) need specialized tools and training. We also perform safety checks for gas, carbon monoxide, and electrical hazards. Maintenance members can cut costs with 15% off repairs or up to 60% off on Signature plan qualified repairs. We service all major brands in Pittsburgh and nearby.

Updated: 2026-01-02

Need help in Pittsburgh, PA? Call (412) 254 4979 or book online.

"Tech Ed M. was great." — Ed M.

If your AC runs but isn’t cooling, try a few quick checks. Set the thermostat to Cool and lower the setpoint. Replace a dirty air filter. Clear debris around the outdoor unit and confirm its fan spins. Check the breaker and furnace/air handler switch. If you see ice on the lines or coil, turn AC Off and fan On to thaw, then call. Ongoing warm air often needs refrigerant checks, coil cleaning, or control calibration by our NATE-certified techs serving Pittsburgh and nearby.

Updated: 2026-01-02

Need help in Pittsburgh, PA? Call (412) 254 4979 or book online.

The average furnace repair cost for homeowners with Boehmer Heating & Cooling is not a flat rate; it varies by the fault, required parts, and labor time, and is confirmed after an on-site diagnosis. Most of the final price comes down to which part needs replacement and how long the repair takes. Our Pittsburgh-area team handles these calls daily and will give you clear pricing before work begins. Right now, you can schedule a $99 Service Repair; final repair pricing follows diagnosis. A skilled technician narrows the issue fast to avoid unnecessary parts and delays.

Watch for these cost signals:

• Lower: simple adjustments, sensor checks, or minor electrical fixes.
• Higher: major safety faults, specialty parts, or difficult access work.
• Replace instead of repair: repeated breakdowns, very old equipment, or a major component failure.

For an exact number, schedule a diagnostic so a technician can inspect the system safely.

Updated: 2026-06-26

Need help in Bakerstown, PA? Call (412) 254 4979 or book online. “Rotley was incredible. Patient and clear. He explained everything and was so clear on what needed to be done to fix our furnace. Best experience ever.” — Lauren S.

There isn’t a single “average” furnace repair price because costs depend on the problem, parts, and system type. We start with a $89 diagnostic service visit, then your technician confirms repair pricing on site. Maintenance members receive 15% off repairs, labor, and diagnostic fees. Signature plan members get up to 60% off qualified repairs. All labor services carry a 1‑year warranty. We offer 24‑hour service and keep thousands of parts in stock for faster fixes in the Pittsburgh area.

Updated: 2026-01-02 00:00:00

Need help in Bakerstown, PA? Call (412) 254 4979 or book online.

HVAC repair for homeowners usually includes a full system diagnosis, targeted part replacement, safety checks, and a verified fix. Most visits begin with testing to confirm the true cause before any parts are changed. Technicians handle everything from small electrical fixes to refrigerant leak repairs and, when needed, recommending system replacement. For urgent breakdowns, 24-hour service is available. Our team provides this same level of work for homes throughout the Pittsburgh region, including Washington County.

Typical tasks a technician may perform during HVAC repair include:

• System diagnostic and performance testing
• Electrical component repair or replacement
• Refrigerant leak check and recharge
• Drain and coil cleaning to restore airflow
• Gas, carbon monoxide, and electrical safety testing
• Thermostat calibration or upgrade
• Final run test and a clear repair quote before any work begins

If the system seems unsafe or keeps tripping power, turn it off and schedule service right away.

Updated: 2026-08-01

Need help in Washington, PA? Call (412) 254 4979 or book online.

Same-day HVAC repair with Boehmer Heating & Cooling typically starts with an $89 diagnostic service visit. Final repair pricing depends on the part and labor your technician confirms on site. Maintenance members receive 15% off repairs and reduced service fees. Signature plan members get up to 60% off qualified repairs. Members also get free 24-hour priority service with a technician at your door within 24 hours. We keep thousands of parts in stock for quick fixes. Service available across Pittsburgh and nearby areas.

Updated: 2026-01-02

Need help in Pittsburgh, PA? Call (412) 254 4979 or book online.